|
|
|
|
|
|
Features} | | Xin'an standard led street lamp 24W | | European standard flameproof 24W roadway light
|
|
Features} | | Xin'an standard led street lamp 24W | | European standard flameproof 24W roadway lights | underground roadway lights | |
1 explosion-proof, (2) safe, 3. Stable 4 high level of quality and safety, 5. Products are mainly dominated by yellow, etc.
Applicable occasions} {Xin'an standard led street lamp 24W / European standard flameproof 24W roadway lights / underground tunnel light]
For coal mine methane and coal dust with explosive gas mixture occasions. Coal haulage roadway, shaft bottom, electromechanical caverns, back to the wind tunnel, coal preparation plant lighting.
Product Overview} {Xin'an marked led street lamp 24W / European standard flameproof 24W roadway lights / underground tunnel light]
LED roadway lights with the most advanced high-power LED as the light source green light, according to the national standard "GB386.1.2.3-2000 Electrical equipment for explosive atmospheres" and requires careful design and manufacture, proof mark for ExdI, product standard lamps by the coal industry Shanghai Electrical Inspection Station Explosion qualified national mine safety standard product safety signs Center issued a safety certification mark.
Standard product features} {Xin'an led street lamp 24W / European standard flameproof 24W roadway lights / underground tunnel light]
◆ flameproof LED roadway lights adopts international advanced electronic integrated circuits, wide voltage design, with a working voltage range, 85V ~ 265V voltage can work. Light DC, low voltage power supply, no flicker and electromagnetic interference, no red (purple) outside the radiation, no mercury vapor fluorescent lamps and other pollutants, in line with the EU's future lighting production standards, is safe and healthy lighting, environmental effects evident .
◆ low power consumption, at the same illumination, the power consumption of the incandescent lamp 1/10, energy-saving fluorescent lamps 1/2, with significant energy savings.
◆ reasonable structure, beautiful appearance, small size, light weight, explosion-proof, shock and vibration, heat resistance, good sealing, maintenance and so on.
◆ lamp with power, lighting and wiring separate sub-chambers unique design, making the whole lamp is not only good looks, easy to install, but also greatly improve the lighting of the explosion, impact resistance, vibration, heat resistance performance, the indicators in full compliance Mine explosion-proof lamps national and industry standards.
} Installation: [Xin'an standard led street lamp 24W / European standard flameproof 24W roadway lights / underground tunnel light]
① First, combined with the actual needs of the job site to determine where and how to install lighting, according to the distance between the lamp to the power supply contacts for the corresponding length Φ8 ~ Φ14 mm three-core cable.
② Open the lamp cover on the side of set screws, then unscrew the lamp cable into the mouth of the compression nut, open the cover, the power cable through the compression nut were introduced into the internal wiring terminals, as shown ways to connect fixed , then tighten the cable clamp nut and lamps cover.
③ replace the lamp, unscrew the fixed light ring Hexagon set screws, rings and transparent pieces of the lamp assembly and unscrew the lamp body, put a new bulb in the opposite direction of the fixture can be installed.
Warning:
1, replacement bulbs and cut off the power before removing the fixture.
2, no live on.
3, when used, some light surface temperature is a normal phenomenon; transparent center temperature is higher, not touch.
4, the installation of lamps, lighting should be the nearest safe ground.
Performance Parameters
The main technical indicators} Xin'an standard led street lamp 24W / European standard flameproof 24W roadway lights / underground tunnel light]
1 explosion-proof performance: flameproof, in line with national and industry standards
2.IP class: IP65
3 Working environment: -20 degrees - +60 degrees
4 Power Specifications: 12W, 18W, 20W, 24W, 30W, 36W
5 Weight: DGS20 (30) / 127L (A) lamps 2.73 kg
6 Power supply: AC85V-265V, 50HZ
7 Illumination: Lx (3 meters) ≥ 45
8 Using Rated voltage: 127V
| | Xin'an standard roadway lights Division | | http://qqhjxd.cn.china.cn | |
|
|
|
|
|
|
|
|
|
|
